Preparation and Characterization of Porous Titania Ceramic Scaffolds

Inga Narkevica, Laura Stradina, Vladimir Yakushin, Jurijs Ozolins


Biocompatible ceramics have recently attracted increasing attention as porous scaffolds that stimulate and guide natural bone regeneration. Due to excellent biocompatibility of titania (titanium dioxide or TiO2) porous three-dimensional (3D) TiO2 structures have been proposed as promising scaffolding materials for inducing bone formation from the surrounding environment and for enhancement of vascularisation after implantation. In this paper, 3D porous TiO2 ceramic scaffolds were produced via polymer foam replica method. This work deals with several important issues that are considered to be important for 3D scaffolds applied to regenerate bone tissue: pore size, porosity and mechanical strength. TiO2 ceramic scaffolds with pore size 300 μm − 700 μm and porosity > 90 % were obtained. Scaffolds showed fully open and interconnected pore structure that remained after recoating them with low viscosity TiO2 slurry. By optimising thermal treatment conditions grain growth and collapse of struts could be controlled in a way that resulted in higher compressive strength. Recoating greatly improved compressive strength and it reached 0.74±0.08 MPa after two coatings without causing changes in the open porestructure.


Titanium dioxide, scaffold, microstructure, porosity, strength.

Full Text:



Chan, B.P., Leong, K.W. Scaffolding in tissue engineering: general approaches and tissue-specific considerations. European Spine Journal, 2008, vol. 17, pp. 467–479.

Tiainen, H., Wohlfahrt, J.C., Verket, A., Lyngstadaas, S.P., Haugen, H.J. Bone formation in TiO2 bone scaffolds in extraction sockets of minipigs. Acta Biomateriala, 2014, vol. 8, pp. 2384–2389.

Sabetrasekh, R., Tiainen, H., Lyngstadaas, S.P., Reseland, J., Haugen, H.J. A novel ultra-porous titanium dioxide ceramic with excellent biocompatibility. Journal of Biomaterial Applications, 2011, vol. 25, pp. 559–580.

Verket, A., Tiainen, H., Haugen, H.J., Lyngstadaas, S.P., Nilsen, O., Reseland, J.E. Enhanced osteoblast differentiation of scaffolds coated with TiO2 compared to SiO2 and CaP coating. Biointerphases, 2012, vol.7, N 36.

Wei, J., Chen, Q.Z., Stevens, M.M., Roether, J.A., Boccaccini A.R. Biocompatiblity and bioactivity of PDLAA/TiO2 ans PDLLA/TiO2/Bioglass nanocomposites. Materials Science and Engineering C, 2008, vol. 28, pp. 1–10.

Haugen, H.J., Monjo, M., Rubert, M., Verket, A., Lyngstadaas, S.P., Ellingsen, J.E., Ronold, H.J, Wohlfahrt, J.C. Porous ceramic titanium dioxide scaffolds promote bone formation in rabbit peri-implant cortical defect model. Acta Biomateriala, 2013, vol. 9, pp. 5390–5399.

Narkevica, I., Ozolins, J., Berzina-Cimdina, L. Effects of surface modification of titania on in vitro apatite-forming ability. Key Enginering Materials, 2014, vol. 604, pp. 196–199.

Haugen, H.J., Will, J., Kohler, A., Hopfner U, Aigner, J., Wintermantel, E. Ceramic TiO2-foams: characterization of potential scaffold. Journal of the European Ceramic Society, 2004, vol. 24, pp. 661–668.

Novak, S., Druce, J., Chen, Q.Z., Boccaccini, A.R. TiO2 foams with poly-(D,L-lactic acid) (PDLLA) and PDLAA/Bioglass coating for bone tissue

engineering scaffolds. Journal of Material Science, 2009, vol. 44, pp. 1442–1448.

Tiainen, H., Eder, G., Nilsen, O., Haugen, H.J. Effect of ZrO2 addition on the mechanical properties of porous TiO2 bone scaffolds. Materials Science and Engineering C, 2012, vol. 32, pp. 1386–1393.

Tiainen, H., Lyngstadaas, S.P., Ellingsen, J.E., Haugen, H. Ultra-porous titanium oxide scaffold with high compressive strength. Journal of Materials Sciene: Materials in Medicine, 2010, vol. 21, pp. 2783–2792.

Tiainen, H., Wiedmer, D., Haugen, H.J. Processing of highly porous TiO2 bone scaffolds with improved compressive strength. Journal of the European Ceramic Society, 2013, vol. 33, pp. 15–24.

Studart, A.R., Gonzenbach, U.T., Tervoort, E., Gauckler, L.J. Procession routes to macroporous ceramics: a review. Journal of American

Society, 2006, vol. 89, N 6, pp. 1771–1789.

Schwartzwalder, K., Somers, A.V. Method of making a porous shape of sintered refractory ceramic articles. US patent No. 3090094, 163.

Hanaor D.A.H., Sorrell C.C. Review of the anatase to rutile phase transformation. Journal of Material Science, 2011, vol. 46, pp. 855–874.

DOI: 10.7250/msac.2015.001

Copyright (c)